Epoxies
- Primers & Sealers
- Fillers, Screeds & Covings
- Binders Self Levelling
- Sealers & Topcoats

Floorcoat Epoxy SB
A high performance epoxy floor coating. It can be applied onto bare concrete, or previously applied, well cured epoxy coatings. It is also suitable for painting steel ‘vastrap/checker plate’ flooring, stair treads and walkways.

Floorcoat Epoxy SF Sealer
A two part penetrating sealer that can be applied to suitable prepared concrete floors prior to the application of solvent free epoxy and polyurethane Floorcoat products.

Floorcoat Epoxy WB
An easy-to-use water based primer/topcoat which provides excellent adhesion to a variety of surfaces. Used as an adhesive primer on tiled, gloss, masonry, aluminium, galvanizing, metals, polystyrene and glass.

Epoxy WB GP Primer
Used as an insulating coating over bituminous coatings and on furniture where stains leach through conventional finishes. This is a thermosetting primer which can be overcoated by a variety of topcoats, solvent based and water based.

Floorcoat Epoxy SF Scraper Coat
A low viscosity, two part flooring composition that can be applied by smooth steel trowels to suitably prepared concrete floors to seal any porosity and fill small holes and ‘omegas’ that may cause bubbling through to subsequent top coats.

Floorcoat Epoxy SF Mortar
Epoxy Mortars for filling, screeding & coving.

Floorcoat Epoxy SF SL (1-3mm)
Two part self-levelling flooring composition that can be flow-applied to suitably prepared concrete floors to form a glossy, hard wearing and functional surface.

Floorcoat Epoxy SF SL Chemresist (1 - 3mm)
Two part self-levelling flooring composition that can be flow-applied to suitably prepared concrete floors to form a glossy, hard wearing and chemically resistant surface.

1K SF Silane Hybrid Floor Sealer
A solvent free, one component clear flooring system for application direct to concrete/mineral floor surfaces.

Floorcoat Epoxy SF HB
Floorcoat Epoxy SF HB is a pigmented, solvent free epoxy with excellent self-levelling properties. Designed as a seamless floor protection coating at thickness between 200 to 500 microns DFT.

Floorcoat SF Non-Slip
Floorcoat Epoxy Non-Slip is a high performance, solvent free coating designed for use as a universal slip deterrent system for concrete and metallic surfaces.
- Application Equipment
- Acrylic
- Bona Floor Coatings
- Cementitious
- Epoxies
- Methyl Methacrylate
- Polyaspartic
- Polyurethanes