PLASTILINE® 1C Waterborne Area Marking
High solids, high sheen road marking paint for line & area marking.
PLASTILINE® 1C Waterborne AREA MARKING is a one component, Quick-Set technology waterborne road marking paint with a high hardness and a high sheen finish. It offers fast drying and fast return to service even in adverse conditions of low temperature, high humidity, and low air movement. PLASTILINE® 1C Waterborne AREA MARKING flows easily, has good levelling properties, and dries to a uniform finish free from brush marks, lapping streaks and other imperfections. This product is suitable for brush & roller application to both local & imported bituminous binders and is also suitable for application with road marking spray equipment.
Specification compliance: EN 1871
Available in 5Lt & 20Lt
Features & Benefits
- High sheen with low dirt retention & marking resistance
- Easy to process with all marking machines, spray equipment and can be applied using a brush or roller
- Extremely weather resistant & abrasion resistant
- Available in a wide range of colours
- Waterborne, high solids formulation
- Fast drying time
- Excellent levelling & flow properties
- Excellent glass bead retention, adhesion, and long-term retro reflectance
- Excellent obliteration / hiding power
- High reflectivity / luminance factor with glass beads added
- High sag resistance allows for excellent build and coverage on new asphalt
- Excellent resistance to bleeding on bitumen substrates
- Excellent alkali resistance on concrete surfaces
- Excellent adhesion to asphalt
- Excellent performance on suitably primed concrete
- Available in any Classic RAL Colours
Intended Uses
PLASTILINE® 1C Waterborne AREA MARKING is formulated as a high solid’s waterborne road marking paint for the marking of highways, local roads, intersections, crosswalks, landing strips and parking lots with or without reflective glass beads. PLASTILINE® 1C Waterborne AREA MARKING will adhere directly to asphalt and correctly primed concrete roads or paved surfaces.
PLASTILINE® 1C Waterborne AREA MARKING has an increased “open time”, making it suitable for both small & large applications such as parking bays, walkways, or pedestrian crossing etc. The higher sheen and higher hardness results in increased dirt resistance, marking resistance and easier cleanability.
PLASTILINE® 1C Waterborne AREA MARKING is used in all applications where solvent borne products are specified.
-
The advantages of the PLASTILINE 1C Waterborne AREA MARKING compared to traditional solvent-based traffic paints include:
- Better glass bead retention giving extended retro reflectivity/night-time visibility.
- Extended whiteness and daytime visibility.
- Environmentally acceptable.
- Increased applicator safety – exposure to volatile organic solvents is greatly reduced.
- Easier, safer clean-up using water and mild solvent or detergents.
- Low odour.
- Significantly reduced disposal costs – can be solidified and disposed of as non-hazardous waste.
- Non-Flammable.
Systems
| Systems | Typical Thickness (DFT) | Typical Yield | Recommended Drop On | Typical Drop on Yield |
|---|---|---|---|---|
| Smooth | 0.250 mm | 0.500 lt/m² | - | - |
| Reflective | 0.250 mm | 0.500 lt/m² | Reflective Glass Beads EXTRA 125-850 AP | 0.600 kg/m² |
| Non-Skid | ||||
| Base Layer | 0.250 mm | 0.500 lt/m² | Non-Skid Crushed Glass EXTRA 125-850 | 0.600 kg/m² |
| Final Layer | 0.250 mm | 0.500 lt/m² | ||
Standard Colours
White
Yellow
Red
Black
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
