Primers to be applied before the application of road marking products
A two component, advanced waterborne clear epoxy acrylic primer. EPAPRIME Surface Primer is a highly flexible with a long pot life & is over-coatable by solvent & waterborne systems.
Water based, no odour during installation.
Flexible coating to take thermal expansion and contraction and mechanical stresses from traffic.
Excellent adhesion.Early hardness build up.
Quick drying, 1 hour touch dry at at 25°C
PlastiLine® ThermoPlastic High Penetration Primer is a colourless, fast drying and easy to apply oil based rubberized primer designed to be used in combination with alkyd & hydrocarbon thermoplastic road marking paints. This primer is applied by brush or spray to enhance the adhesion of thermoplastic paints to the surface & is typically used on concrete & asphalt or a mixture of both.
Excellent adhesion to asphalt & concrete.
Ensures superior themroplastic paint adhesion with concrete, asphalt or bitumen surfaces.
Creates a moisture barrier that lengthens the lifetime of the paint system.
A one component, rapid drying, solvent based very low viscosity clear primer based on a special blend of flexibilized methacrylate polymers.
Application possible with brush, roller or by spray
Provides adhesion for road marking paints on dusty & poor road surfaces
Fast drying - 10 minute overcoating time @ 25°C
Creates a moisture barrier that lengthens the lifetime of road marking system