Indoor Markings

Epoxy SB Floors & Walls

High-Performance, Two-Component, Solvent-Based, Polyamide-Cured Epoxy Floor Coating For Light To Medium-Duty Applications.

Ideal for bare or previously coated concrete, as well as steel checker plate, it’s commonly used in warehouses, production areas, car parks, chemical plants, food facilities, and aircraft hangars. Epoxy SB is suitable for both floor and wall applications, offering long-term protection and performance in demanding environments.

PlastiLine^® MMA 165 Dry Area Line Marking

Ultra-performance, Self-Smoothing, hard topcoat for interior dry areas on top of MMA primers.

100% solids, two-component, thixotropic methyl methacrylate (MMA) resin system designed as a self-smoothing, hard-wearing topcoat for interior dry areas. Applied over MMA primers such as PlastiSeal MMA Concrete Primer LV or MV, it delivers a satin matt finish with exceptional abrasion resistance, low yellowing, and easy cleanability. Its rapid curing, floors can be reopened to normal traffic within two hours, ensuring minimal disruption.

Ideal for severe traffic areas, this elasticized MMA coating is used for precise line marking in warehouses, production facilities, cold rooms, supermarkets, exhibition areas, laboratories, gyms, corridors, and other high-demand indoor environments.

PlastiLine^® MMA 526 Wet Area Line Marking

Thixotropic, Medium Viscosity Hard Topcoat For Interior Wet Areas On Top Of Broadcast MMA Primers.

100% solids, elasticized, two-component, medium-viscosity methyl methacrylate resin coating designed for use over MMA-primed surfaces in interior environments exposed to constant moisture, particularly in the food processing industry. This pigmented, high-performance topcoat provides durable, highly visible line and safety demarcations with a very hard, abrasion-resistant film, offering excellent hot water and oil resistance up to 80°C. It features rapid curing, allowing floors to reopen to traffic in just two hours, and delivers good self-levelling, low yellowing, and non-slip safety when combined with quartz.

Ideal for slaughterhouses, butcheries, fish factories, kitchens, breweries, dairies, washrooms, bund areas, and other wet production environments, it ensures minimal downtime and long-term performance in hygiene-critical spaces.

PlastiLine^® Polyurethane

High-Performance, Two Component, Solvent Based, Quick Drying, High Build, Cold Applied Polyurethane.

A aliphatic polyurethane coating system formulated for line marking and demarcation in high-traffic environments. This high-build formulation, typically applied at a wet film thickness of 350 µm, offers 4 to 5 times the service life of conventional water-based and solvent-based road marking paints applied at comparable thicknesses. It provides excellent adhesion, abrasion resistance, and chemical resistance, with high sag stability, superior coverage, and no dry spray, ensuring clean, sharp lines. The system is breathable, resists bitumen bleeding and alkalis, and supports retro-reflectivity with glass beads.

Ideal for stop streets, intersections, pedestrian zones, parking lots, and bike lanes, it can also be made nonslip for enhanced safety.

PU DTM FLEXI HB

Ultra-Performance, Solvent Based, High Build, Flexible Polyurethane Primer / Finish.

High-solids, Two pack, solvent-based aliphatic polyurethane coating, chemically engineered with a flexible polyester-modified backbone for superior mechanical and chemical performance. Its formulation includes zinc phosphate anti-corrosive pigments and advanced adhesion promoters, providing excellent substrate bonding and long-term protection.

This coating is specifically suited for floor demarcation and industrial line marking, where high durability, flexibility, gloss retention, and resistance to abrasion, chemicals, and cold environments are critical.

SPECAQUA^® 2K PU Flexi Floors & Lines

Ultra-performance, Water based, flexible, aliphatic polyurethane coating for interior floors & walls.

High-solids, two-pack aliphatic polyurethane coating designed for industrial floor demarcation and line marking. It features a flexible polyester-modified resin system, zinc phosphate for corrosion protection, and advanced adhesion promoters for excellent bonding to concrete and metal. The coating dries quickly, has a long pot life, and cures to a smooth, semi- to high-gloss finish that is tough, UV-resistant, and highly durable.

Ideal for high-traffic areas, it resists abrasion, chemicals, and extreme temperatures, making it perfect for warehouses, factories, and cold storage floors.

SPECFLOOR^® PU Silk Matt

Ultra-performance, low-viscosity, solvent-based, pigmented aliphatic polyester polyurethane coating designed for high flexibility and long-term durability.

Advanced light stabilizers and adhesion promoters, it delivers a smooth silkmatt finish suitable for both interior and exterior surfaces. This coating offers excellent UV resistance, ensuring lasting protection and colour retention even on UV-sensitive substrates.

Ideal for use on elasticized polyurethane or MMA flooring systems, EPDM or SBR rubber flooring with PU binders, concrete, and epoxy surfaces, it forms a tough, resilient, and UV-stable layer that withstands abrasion, vehicular traffic, and the demands of sports-related activities.