ARMOURCOAT®
Polyurethane High Strength SB Colour
ArmourCoat® Polyurethane High Strength SB Colour is a premium two-component, solvent-based polyurethane topcoat enhanced with advanced polyaspartic technology to provide exceptional long-term protection and decorative performance in demanding industrial environments. Developed for applications where appearance is as important as durability, the coating delivers outstanding UV stability, colour retention, gloss retention, abrasion resistance, and mechanical toughness. Its dense, high-hardness finish withstands harsh weathering, impact, chemicals, and daily operational wear while maintaining a professional appearance for years. Tintable to the complete RAL Classic colour range and custom colours on request, ArmourCoat® Polyurethane High Strength SB Colour is ideally suited for industrial equipment, commercial vehicles, mining machinery, agricultural equipment, marine topside structures, and heavy-duty steelwork requiring long-lasting colour stability and superior exterior performance.
Available in 3.6L & 4L kit sizes.
Features & Benefits
- Two-component polyaspartic-modified polyurethane technology
- UV-stable aliphatic polyurethane
- Superior colour retention
- Excellent gloss retention
- Non-yellowing formulation
- Tintable to RAL Classic colours
- Custom colour matching available
- Excellent abrasion resistance
- High impact resistance
- Shore D hardness of 45 (Shore A 95)
- Excellent chemical resistance
- Resistant to fuels, oils and hydraulic fluids
- Excellent weather resistance
- Outstanding outdoor durability
- Professional semi-gloss to gloss finish
- Excellent flow and levelling
- Suitable for spray, brush and roller application
- Stonechip and underbody spray compatible
- Suitable for demanding industrial environments
- Long service life with minimal maintenance
Intended Uses
ArmourCoat® Polyurethane High Strength SB Colour is designed as a high-performance protective and decorative topcoat for industrial assets exposed to severe outdoor conditions. The advanced polyaspartic-modified polyurethane technology provides exceptional resistance to ultraviolet degradation, weathering, abrasion, impact, and chemical exposure, making it ideal for equipment that must maintain both its protective properties and appearance throughout extended service life. The coating is widely used on commercial vehicles, structural steel, mining and construction equipment, agricultural machinery, industrial plant, marine topside structures, and engineered components where colour stability, durability, and long-term corrosion system performance are essential. Applied over a suitable epoxy or anti-corrosion primer, it forms the durable finishing layer in high-performance protective coating systems.
Typical Applications:
- Structural steel
- Mining equipment
- Construction machinery
- Agricultural equipment
- Commercial vehicles
- Truck bodies
- Trailer beds
- Truck load bins
- Bus bodies
- Vehicle panels
- Industrial machinery
- Manufacturing equipment
- Plant equipment
- Steel fabrications
- Marine topside structures
- Offshore equipment above waterline
- Recreational vehicles
- ATVs and quad bikes
- Workshop fabricated components
- Industrial maintenance projects
- Fleet refurbishment
- Colour-coded industrial assets
Technical Information:
- Product Type: Two-Component Polyaspartic-Modified Polyurethane Topcoat
- Technology: UV-Stable Aliphatic Polyurethane
- Configuration: Two Component
- Colours:
- Tintable to RAL Classic Colours
- Custom Colours Available - Finish: Semi-Gloss to Gloss
- Mixing Ratio: 3 : 1 (Volume)
- Gel Time: Approximately 25 Minutes @ 25°C
- Shore Hardness:
- Shore D 45
- Shore A 95 - Volume Solids: Approximately 60–70%
- Density: 1.05–1.15 kg/L
- Recommended DFT: 100–150 Microns per Coat
- Recommended WFT: 150–250 Microns
- Coverage:
- 4.0–4.5 m²/L @ 150 μm DFT
- 6.0–7.0 m²/L @ 100 μm DFT - Number of Coats:
- Minimum 2
- 3 for Aggressive Environments - Service Temperature:
- -20°C to +90°C Continuous
- Up to +120°C Short Term - Touch Dry: 1–2 Hours @ 25°C
- Hard Dry: 6–8 Hours @ 25°C
- Minimum Recoat: 6–8 Hours @ 25°C
- Full Cure: 7 Days @ 25°C
- Application Methods:
- Airless Spray
- Brush
- Roller
- Stonechip / Underbody Spray Gun - Airless Spray Pressure: 150–200 Bar
- Spray Tip: 17–21 Thou
- Thinner: PU Thinner (Maximum 10%)
- Shelf Life: 12 Months
- Pack Sizes:
- 3.6 Litre Kits
- 4 Litre Bulk Kits
Colours & Finishes
Standard Colours
RAL 1019
Grey Beige
RAL 3020
Traffic Red
RAL 5013
Cobalt Blue
RAL 7016
Anthracite Grey
RAL 6003
Olive Green
RAL 9016
Traffic White
RAL 9017
Traffic Black
RAL 9006
White Aluminium
Colour Chart
Tintable to any RAL Classic Colour on request. Available in semi-gloss & gloss finishes.
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
Industrial Protective Coatings
Tell Us More About Your Project
