Adhesion promoted, acrylic resin, solvent based road marking paint.
PLASTILINE® 1C Solventborne CAP (Concrete, asphalt & paving) is a one component, high solids, solvent-based, adhesion promoted road marking paint offering fast drying & fast return to service with very high coverage & a high sheen.
Specification compliance: EN 1871
Available in 5Lt & 20Lt
PLASTILINE® 1C Solventborne CAP road marking paint has been formulated to provide enhanced adhesion to brick & curb surfaces. It can be used on interlocking bricks, paved roads & parking lots, curbs, paved islands and on airport concrete aprons with or without reflective glass beads. Due to the high pigment load, PLASTILINE® 1C Solventborne CAP has very high coverage and the high sheen provides a more dirt resistant surface.
PLASTILINE® 1C Solventborne CAP can be applied directly to well-prepared paved & curb surfaces. For enhanced performance, a primer can be used – Epoxy WB Concrete Primer, PLASTILINE® Dust Fixing Primer SB or PLASTILINE® Dust Fixing Primer WB.
| Systems | Typical Thickness (DFT) | Typical Yield | Recommended Drop On | Typical Drop on Yield |
|---|---|---|---|---|
| Smooth | 0.275 mm | 0.500 lt/m² | - | - |
| Reflective | 0.275 mm | 0.500 lt/m² | Reflective Glass Beads EXTRA 125-850 AP | 0.600 kg/m² |
| Non-Skid | ||||
| Base Layer | 0.275 mm | 0.500 lt/m² | Non-Skid Crushed Glass EXTRA 125-850 | 0.600 kg/m² |
| Final Layer | 0.275 mm | 0.500 lt/m² | ||
White
Yellow
Red
Black
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
