EPAPRIME
Surface Primer
Advanced two component, highly flexible waterborne epoxy-acrylic primer. A two component, advanced waterborne clear epoxy-acrylic primer offering the advantages of toughness from epoxy and the UV and colour fade resistance of acrylics. This primer is highly flexible, has a long pot life and is overcoatable by solvent and waterborne coating systems.
Features & Benefits
- Water based, no odours during installation
- Solvent free
- Quick drying, 1 hour touch dry at @ 25°C
- Flexible coating to take thermal expansion and contraction and mechanical stresses from traffic
- UV and colour stable
- High adhesion
- Early hardness build-up
- 1:1 Mixture by volume or by mass
- Applied in 1 to 2 coats or as needed
Intended Uses
EPAPRIME Surface Primer is suitable for use on cementitious screeds, concrete surfaces, asphalt surfaces, flexible surfaces such as waterproofing membranes, PU foam, styrene EPS.
EPAPRIMER Surface Primer is easy to mix, easy to use and provides excellent results. The primer dries quickly (within 90 minutes) and a long working time, (pot life of 24 hours) which allows larger batches to be mixed.
Applied to properly cleaned concrete substrates preventing bubbles and other outgassing. Typically used in a 1-coat application, but can be used in 2 coats for very rough or porous concrete surfaces. Primed surface should have a uniform non-porous appearance before topcoating.
Clean us is easy, just use soapy water for hands and tools.
