Epoxy
8910 PW
Epoxy 8910 PW is a high-performance polyamide-cured epoxy lining developed for steel and concrete structures operating in immersion conditions. This high-solids coating provides outstanding corrosion protection, excellent water resistance, and long-term durability for potable water infrastructure, process water systems, hydroelectric installations, and mining equipment. Designed as a multi-coat lining system, Epoxy 8910 PW conforms to SANS 1217 Type 1A requirements for drinking water contact, making it an ideal solution for tanks, pipelines, valves, pumps, and water-retaining structures requiring reliable long-term protection.
Available in 4L and 20L kit sizes.
Features & Benefits
- High-build polyamide-cured epoxy lining
- Suitable for immersion service environments
- Certified for potable drinking water contact
- Conforms to SANS 1217 Type 1A requirements
- Excellent corrosion protection for steel substrates
- Suitable for both steel and concrete structures
- Direct-to-metal, self-priming technology
- High solids formulation for enhanced film build
- Excellent water resistance
- Good chemical resistance
- Resistant to aviation fuels
- Short curing period for reduced project schedules
- Good low-temperature curing characteristics
- Suitable for new construction and refurbishment projects
- Excellent adhesion to abrasive blast-cleaned steel
- Suitable for tanks, pipelines, valves, and pumps
- Immersion temperature resistance up to 80°C
- Available in water blue, grey, and red oxide colours
Intended Uses
Epoxy 8910 PW is specifically formulated for the protection of steel and concrete assets operating under continuous immersion conditions. The coating forms a dense, durable barrier that protects against corrosion, water ingress, and chemical attack while maintaining compliance with potable water requirements. Its versatility makes it suitable for municipal water infrastructure, hydroelectric facilities, industrial water systems, mining operations, and process plants where long-term immersion performance and drinking water compliance are critical.
Typical Applications:
- Potable water storage tanks
- Drinking water reservoirs
- Steel water pipelines
- Municipal water infrastructure
- Water treatment facilities
- Hydroelectric installations
- Cast iron valves
- Water control gates
- Pump housings and pump stations
- Screw pumps
- Sewage treatment equipment
- Raw water storage systems
- Treated water facilities
- Cooling water ducts and channels
- Mining thickener tanks
- Thickener rake arms
- Industrial process water systems
- Concrete water-retaining structures
- Corrosion protection of immersion equipment
- Water and wastewater infrastructure projects
- Industrial immersion service applications
Technical Information:
- Product Type: Polyamide-Cured Epoxy Lining
- Technology: High-Solids Solvent-Based Epoxy
- Mixing Ratio: 3:1 (Base : Activator)
- Finish: Gloss
- Colours: Water Blue, Grey, Red Oxide
- Volume Solids: 78%
- Typical DFT: 275–375 Microns
- Coverage Rate: 2.83m²/L at 275μm DFT
- Number of Coats: Typically 3 Coats
- Pot Life:
- 3 Hours at 15°C
- 1.5 Hours at 20°C
- 1 Hour at 30°C - Induction Time: 5 Minutes
- Application Methods: Brush, Roller, Airless Spray
- Full Cure: Up to 14 Days
- Immersion Temperature Resistance: Up to 80°C
- Pack Sizes: 4L and 20L Kits
Colours & Finishes
Various colours available.
Water Blue
Grey
Red Oxide
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
Industrial Protective Coatings
Tell Us More About Your Project
