PLASTILINE® WB Cold Plastic Screed
Water based, thick layer screed, cold plastic road marking.
PLASTILINE® WB Cold Plastic Screed is a new generation water-based hybrid acrylic retroreflective road marking, containing premixed retroreflective glass beads and non-skid aggregates.
Available in 8 kg & 35 kg Kits
Features & Benefits
- Durability exceeding 3 years heavy traffic
- Little to no odour
- Clean with water
- Heating not required
- Open to traffic in 30-60 minutes at 25°C (Irrespective of thickness)
- Excellent obliteration / hiding power, high luminance
- High reflectivity / luminance factor with glass beads added
- High sag resistance allows for excellent build and coverage on new asphalt
- Excellent resistance to bleeding on bitumen substrates
- Excellent alkali resistance on concrete surfaces
- Resistant to weathering
- Excellent adhesion to asphalt (Concrete surfaces will require priming)
- Excellent abrasion resistance
- Available in any Classic RAL Colours
Intended Uses
Suitable for use in Bike Lanes, Cross walks, Arrows, Stop Streets & intersections, on highways, in parking lots, as a cool pavement marking also as a decorative road surface marking. PLASTILINE® WB Cold Plastic Screed is applied in layers of 1.5 – 3 mm primarily on asphalt road surfaces either by using hand or automatically driven cold plastic machines.
The thickness depends on the mechanical load and on the evenness of the surface. It is important to ensure a sufficient minimum thickness, especially in the case of heavy traffic load.
When used on concrete road surfaces, the concrete must be pre-treated (e.g., milling, shot blasting or high-pressure water blasting) and Deep Penetrating Primer is applied. The then ready to use PLASTILINE® WB Cold Plastic Screed is mixed with PLASTILINE® WB Cold Plastic Catalyst and applied directly onto the surface using the trowel, rake or draw box.
PLASTILINE® WB Cold Plastic Screed is also suitable for safety or structured road markings.
Systems
| Systems | Typical Thickness (DFT) | Typical Yield | Recommended Drop On | Typical Drop On Yield |
|---|---|---|---|---|
| Standard | 1.5 - 3 mm | 2.77 - 5.55 lt/m² | Reflective Glass Beads EXTRA 125 - 850 AP | 0.6 kg/m² |
Standard Colours
White
Yellow
Red
Black
RAL 5017
Traffic Blue
RAL 6024
Traffic Green
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
