Epoxy
Ceramic Paste
Epoxy Ceramic Paste is a premium two-component, solvent-free, amine-cured epoxy coating reinforced with high-performance ceramic particles to provide exceptional protection against abrasion, erosion, corrosion, and chemical attack. Supplied in a paste consistency, it is designed for direct application onto steel, concrete, and fibreglass without the need for a primer, making it ideal for rebuilding worn components while simultaneously providing long-term protective lining performance. The ceramic-filled formulation creates an extremely hard, smooth surface that reduces wear caused by abrasive slurries, turbulent flow, and mechanical erosion, extending the service life of pumps, valves, heat exchangers, process equipment, and immersion structures. It is also certified for potable water applications in accordance with SANS 1217 Type 1B, making it suitable for water treatment and potable water infrastructure.
Features & Benefits
- Two-component ceramic-filled epoxy
- Solvent-free formulation
- Surface-tolerant technology
- 100% volume solids
- No primer required
- Excellent abrasion resistance
- Outstanding erosion resistance
- Excellent corrosion protection
- Excellent chemical resistance
- Resistant to cutting oils
- Resistant to petrol
- Resistant to dilute acids and alkalis
- Produces a hard, smooth low-friction surface
- Suitable for rebuilding worn equipment
- Excellent adhesion to steel, concrete, and fibreglass
- Fast curing formulation
- Suitable for immersion service
- Certified for potable water applications
- Brush or putty knife application
- High-build repair coating up to 5000 μm DFT
Intended Uses
Epoxy Ceramic Paste is specifically developed for repairing, rebuilding, and protecting industrial equipment exposed to severe abrasion, erosion, corrosion, and immersion conditions. The ceramic-filled epoxy restores damaged surfaces while creating a durable protective barrier capable of withstanding aggressive service environments. It is widely used to repair worn pump casings, impellers, valves, heat exchangers, tube sheets, fan blades, and circulation equipment where conventional repair methods are impractical or costly. The product also serves as a seamless repair compound for rigid polyurethane and epoxy lining systems, making it an ideal maintenance solution for industrial plants, water treatment facilities, mining operations, and process industries.
Typical Applications:
- Pump casings
- Pump impellers
- Water pumps
- Slurry pumps
- Gate valves
- Butterfly valves
- Fan blades
- Heat exchangers
- Tube sheets
- Circulation water equipment
- Process vessels
- Steel tanks
- Concrete tanks
- Potable water reservoirs
- Water treatment facilities
- Wastewater infrastructure
- Fibreglass process equipment
- Mining process equipment
- Industrial repair work
- Epoxy lining repairs
- Polyurethane lining repairs
- Erosion and corrosion protection
Technical Information:
- Product Type: Ceramic-Filled Epoxy Repair & Protective Coating
- Technology: Solvent-Free Amine-Cured Epoxy
- Configuration: Two Component
- Colour: White
- Consistency: Paste
- Finish: Semi-Gloss
- Volume Solids: 100%
- Mixing Ratio: 2 : 1 (Base : Activator)
- Activator: Epoxy Activator Ceramic Paste
- Recommended DFT: 500–5000 μm
- Coverage: 1 m²/L at 1000 μm DFT
- Number of Coats: 2
- Wet Immersion Temperature: Up to 65°C
- Continuous Dry Temperature: Up to 80°C
- Intermittent Repair Temperature: Up to 105°C
- Touch Dry: 3 Hours at 20°C
- Hard Dry: 5 Hours at 20°C
- Minimum Recoat: 3 Hours at 20°C
- Maximum Recoat: 36 Hours
- Pot Life: 30 Minutes at 20°C
- Application Methods:
- Brush
- Putty Knife - Thinner: None Required
- Equipment Cleaner: SA65 Thinner
- Certification: SANS 1217:2011 Potable Water Approved
- Pack Sizes: 1L, 5L, 100 ml Squish Packs & 200 ml Squish Packs
- Shelf Life: 18 Months
Colours & Finishes
White
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
Documents & Resources
Industrial Protective Coatings
Tell Us More About Your Project
