SPECFLOOR®
Epoxy SF HB GlazeCoat
Solvent free high build epoxy floor coating. A two component, pigmented, solvent free, new generation phenalkamine floor coating designed to be applied between 0.20 to 1.50 mm thick in 1 layer.
Features & Benefits
- Unmatched gloss retention than standard epoxy coatings (less than 5% after 200 hours QUV exposure compared to 60% against other epoxies
- Very low colour appearance and beautiful film appearance
- Flows and self-levels to a level, bubble free gloss finish
- Can take light traffic after 24 hours - hard in 72 hours at 20°C
- Excellent adhesion, mechanical strength and durability
- Outstanding flexibility
- Good chemical resistance
- Seamless - easy to clean and maintain
- Provides a pleasing decorative finish
- Provides cost effective performance for many years
- Slip resistant finish in wet areas
- Easy application by brush, roller or squeegee
- Most colour stable epoxy flooring, highly resistant to yellowing
- Early water resistance
- Cold cure down to 0°C
- Long pot life
- Low viscosity
- Excellent water resistance
- Resistant to humidity during cure
Intended Uses
SpecFloor® Epoxy SF HB GlazeCoat is either pigmented or clear solvent free epoxy with excellent self-levelling properties. Designed as a seamless floor protection coating at thickness between 200 to 1500 microns DFT. Epoxy SF HB Glazecoat can be used as a primer on less critical surfaces. Epoxy SF HB GlazeCoat can be used in combination with Non-Slip Aggregate to achieve anti-skid and non-slip finishes.
At the specified DFT’s this product exhibits excellent abrasion, chemical and wear resistance with a high gloss finish in a variety of industrial, residential and commercial environments. The coating will render the surface protected against fuels, oils, lubricants, grease and general contamination. It is advisable to inform Specialized Coating Systems of any other exposures prior to specification or application to ensure product suitability.
Epoxy SF HB GlazeCoat can used but is not limited to the following areas of application:
- General industrial floor coatings.
- Warehouses.
- High Traffic Areas.
- Show Rooms.
- General production facilities.
- Chemical manufacturing plants.
- Pharmaceutical facilities.
- Medical facilities.
- Aircrafts hangars and maintenance areas.
- Battery, generator, transmission and pump rooms etc.
- Food & Beverage production areas.
- Vehicle Movement areas.
