Epoxy
Phenolic 175
Epoxy Phenolic 175 is a high-build, solvent-free two-component epoxy phenolic novolac lining designed for severe chemical service environments. The advanced novolac epoxy technology provides exceptional resistance to mineral acids, alkalis, solvents, chemicals, abrasion, erosion, and elevated temperatures. Its highly cross-linked structure creates a dense protective barrier that delivers long-term protection for steel and concrete assets exposed to aggressive chemical immersion, chemical splash zones, and corrosive process environments.
Available in 5L and 20L kits.
Features & Benefits
- Solvent-free epoxy phenolic novolac technology
- Exceptional chemical resistance
- Outstanding resistance to mineral acids
- Excellent solvent resistance
- High-performance immersion lining
- Excellent abrasion resistance
- Outstanding mechanical durability
- Excellent erosion resistance
- Ideal for aqueous slurry environments
- Superior adhesion to correctly prepared substrates
- Suitable for steel and concrete structures
- High-build protective lining system
- Excellent resistance to chemical splash and fumes
- Resistant to aggressive industrial environments
- Suitable for long-term immersion service
- High resistance to water immersion
- Wet service temperature resistance up to 120°C
- Dry service temperature resistance up to 150°C
- 100% solids formulation
- Low shrinkage during curing
- Long-term asset protection in corrosive environments
- Suitable for brush, roller, and airless spray application
Intended Uses
Epoxy Phenolic 175 is specifically formulated as a heavy-duty protective lining for assets exposed to aggressive chemical attack, elevated temperatures, abrasion, and immersion conditions. The highly cross-linked novolac epoxy matrix provides superior protection against a wide range of acids, alkalis, industrial chemicals, solvents, and process fluids. It is ideally suited to chemical processing facilities, water treatment plants, mining operations, petrochemical installations, and manufacturing facilities where conventional epoxy coatings may not provide sufficient chemical resistance.
Typical Applications:
- Chemical storage tanks
- Acid storage tanks
- Alkali storage tanks
- Process vessels
- Chemical containment bunds
- Secondary containment areas
- Concrete bund walls
- Steel bund structures
- Internal pipe linings
- Process pipework
- Culverts and drainage structures
- Effluent treatment facilities
- Water treatment plants
- Chemical processing facilities
- Mining process plants
- Refinery process areas
- Industrial floors exposed to chemicals
- Chemical loading areas
- Pump stations
- Process equipment exposed to chemical fumes
- Slurry handling systems
- Areas exposed to hot water immersion
- Corrosive industrial environments
Technical Information:
- Product Type: Epoxy Phenolic Novolac Lining
- Technology: Solvent-Free Epoxy Phenolic Novolac
- Configuration: Two Component
- Finish: Gloss
- Colours: Light Grey & Dark Grey
- Density: 1.16 kg/L
- Volume Solids: 100%
- Mixing Ratio: 3 : 1 (Component A : Component B)
- Activator: Epoxy Activator SF 300 Component B
- Induction Time: 5 Minutes
- Typical DFT: 600 Microns
- Application: 2 Coats at 300 Microns per Coat
- Coverage: 3.33m²/L at 300 Microns DFT
- Pot Life: 1.5 – 2 Hours at 25°C
- Touch Dry: 4 Hours at 25°C
- Minimum Recoat: 8 Hours at 25°C
- Full Cure: 7 Days at 25°C
- Temperature Resistance:
- Dry Continuous: 120–150°C
- Wet Continuous: 120°C (Chemical Dependent) - Application Methods:
- Brush
- Roller
- Airless Spray - Pack Sizes: 5L Kit & 20L Kit
- Shelf Life: Minimum 12 Months
Colours & Finishes
Light Grey
Dark Grey
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
