Epoxy
WB Topcoat
Epoxy WB Topcoat is a two-component water-based epoxy finish coat designed to provide durable protection for concrete floors and walls in industrial, commercial, and institutional environments. The polyamide-cured epoxy emulsion technology delivers excellent adhesion, good chemical resistance, and a tough semi-gloss finish that withstands repeated cleaning with hot water and solvents. Its low-odour, non-flammable formulation makes it ideal for occupied buildings and solvent-sensitive environments where conventional solvent-based coatings may not be suitable.
Available in 1L and 5L kit sizes.
Features & Benefits
- Water-based epoxy floor and wall coating
- Low odour formulation
- Non-flammable and safer to apply
- Tough and durable semi-gloss finish
- Excellent adhesion to properly prepared concrete
- Suitable for industrial and commercial flooring
- Resistant to repeated cleaning with hot water
- Resistant to regular cleaning with strong solvents
- USDA-approved curing agent for indirect food contact
- Easy application by brush, roller, or spray
- Suitable for solvent-sensitive environments
- Provides an attractive, easy-to-clean surface
- Good abrasion and wear resistance
- Self-priming on porous concrete surfaces
- Suitable for interior wall and floor applications
- ater clean-up during application
- Cost-effective floor coating solution
- Available in a range of pigmented colours
- Suitable for maintenance and refurbishment projects
- Compatible with water-based and solvent-based maintenance systems
Intended Uses
Epoxy WB Topcoat is designed as a durable protective finish for concrete floors and walls exposed to pedestrian traffic, light industrial use, routine cleaning, and general wear. The water-based formulation makes it particularly suitable for schools, hospitals, nursing homes, food-related facilities, workshops, warehouses, and commercial buildings where low odour and safe application are important considerations. It provides an attractive, hygienic, and easy-to-maintain surface while delivering the durability expected from an epoxy coating system.
Typical Applications:
- Industrial workshop floors
- Warehouse floors
- Commercial flooring systems
- Manufacturing facilities
- Engineering workshops
- Storage and distribution centres
- Schools and educational facilities
- Hospitals and healthcare environments
- Nursing homes and care facilities
- Food processing support areas
- Packaging facilities
- Retail back-of-house areas
- Concrete walls and vertical surfaces
- Maintenance workshops
- Utility rooms and plant rooms
- Service corridors
- Light industrial flooring
- Commercial refurbishment projects
- Concrete floor protection systems
- Interior industrial and commercial environments
Technical Information:
- Product Type: Water-Based Epoxy Finish Coat
- Technology: Polyamide-Cured Epoxy Emulsion
- Colour: Pigmented
- Finish: Semi-Gloss
- Density: 1.30 kg/L
- Volume Solids: 40%
- Mixing Ratio: 2:1 (Base : Activator)
- Typical DFT: 35–50 Microns per Coat
- Coverage Rate: 8m²/L at 50μm DFT
- Number of Coats: 2
- Pot Life: 1 Hour at 20°C
- Touch Dry: 6 Hours at 20°C
- Hard Dry: 12 Hours at 20°C
- Minimum Overcoat Time: 16 Hours
- Maximum Overcoat Time: 7 Days
- Full Cure: 10 Days
- Application Methods:
- Brush
- Roller
- Airless Spray - Temperature Resistance: 80°C Dry Continuous
- Thinning: Up to 20% Clean Water
- Pack Sizes:
- 1L Kit
- 5L Kit - Shelf Life: 18 Months
Colours & Finishes
Pigmented Colours
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
Documents & Resources
Industrial Protective Coatings
Tell Us More About Your Project
