PLASTILINE® MMA Cold Plastic Area Marking
A roller applied cold plastic MMA coating.
PLASTILINE® MMA Area Marking is a solvent free, rapid curing, 2 component methacrylate resin with a combination of fillers and fine anti-skid aggregates. It is applied between 1 – 3 mm thickness by means of a roller, smooth trowel or notched trowel. Whether you’re marking out high-traffic industrial areas or tighter-budget public spaces, this system lets you create the right balance between performance, look, and price.
Available in 4 kg & 21 kg
Features & Benefits
- Vast array of UV Stable colours available
- Excellent structure formation from roller
- Suitable for high temperatures
- Permanently elastic
- Colourfast
- Heating not required
- Hardening of about 30 minutes at 25°C (irrespective of thickness)
- Excellent obliteration / hiding power, high luminance
- High reflectivity / luminance factor with glass beads added
- High sag resistance allows for excellent build and coverage on new asphalt
- Excellent resistance to bleeding on bitumen substrates
- Excellent alkali resistance on concrete surfaces
- Resistant to weathering
- Excellent adhesion to asphalt (some concrete surfaces will require priming)
- Excellent abrasion resistance and low dirt retention
- Hydrophobic surface with self-cleaning properties
- Available in any Classic RAL colours
Intended Uses
PLASTILINE® MMA Area Marking is applied in layers of 1 – 3 mm primarily on asphalt road surfaces by using various rollers or to prepared and primer concrete surfaces. The thixotropic nature of the product will create various textures depending on rollers used to create a structured surface for low anti-skid resistance.
When used on concrete road surfaces, the concrete must be pre-treated (e.g. milling, shot blasting, high-pressure water blasting etc.), and PLASTILINE® MMA Concrete Primer applied. The then ready to use PLASTILINE® MMA Area Marking is mixed with PLASTILINE® MMA BP Hardening Powder and applied directly onto the surface using various types of rollers. Can be overcoated with PLASTILINE® MMA Anti-Blackening for surfaces requiring excellent dirt pickup resistance.
Area Marking System
Built Around Your Needs
Adjust: Resin Content, Fillers Content, Aggregate, Glass Beads, Colour Pigments & Surface Texture
| Product | Ingredients | Recipe in kg |
|---|---|---|
| Tomato Red with 40% Resin | MMA Area Marking Resin | 0.600 |
| Silica Sand | 0.200 | |
| Glass Beads | 0.150 | |
| RAL 3013 Tomato Red |
0.050 |
| Product | Ingredients | Recipe in kg |
|---|---|---|
| Tomato Red with 30% Resin | MMA Area Marking Resin | 0.450 |
| Silica Sand | 0.350 | |
| Glass Beads | 0.150 | |
| RAL 3013 Tomato Red |
0.050 |
| Product | Ingredients | Recipe in kg |
|---|---|---|
| Tomato Red with 20% Resin | MMA Area Marking Resin | 0.300 |
| Silica Sand | 0.500 | |
| Glass Beads | 0.150 | |
| RAL 3013 Tomato Red |
0.050 |
Standard Colours
RAL 9016
Traffic White
RAL 1023
Traffic Yellow
RAL 3020
Traffic Red
RAL 9017
Traffic Black
RAL 5017
Traffic Blue
RAL 6024
Traffic Green
RAL 4003
Heather Violet
RAL 2008
Traffic Orange
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
