PLASTILINE® 1C Solventborne Area Marking
High sheen solvent based, road & area marking paint.
PLASTILINE® 1C Solventborne AREA MARKING road marking paint is a one component, thermoplastic methacrylate resin, aromatic solvent based, road making paint, offering fast drying and fast return to service. Excellent road performance and reduced emissions. Formulated to comply with the requirements of SANS 731-1:2015 Single-Pack Solvent-Based Paints. The higher sheen and resin content improve dirt pick up and chemical resistance making it more suitable for areas of slow-moving traffic where tyre marking, and oil resistance is required.
Available in 5Lt & 20Lt
Features & Benefits
- Excellent adhesion to asphalt
- High sheen
- Excellent levelling
- Excellent adhesion to primed concrete
- Fast drying
- Suitable for both bituminous & concrete surfaces
- Suitable for application with airless and air atomizing equipment
- Good glass bead embedment and retention properties
- Excellent dirt resistance
- Excellent coverage
- Excellent resistance against abrasion
- Excellent alkali resistance on concrete surfaces
- High luminance
- Free of aromatic solvents
- Available in any Classic RAL Colours
Intended Uses
PLASTILINE® 1C Solventborne AREA MARKING has a longer open time is recommended where brush or roller application is required, to achieve an exceptionally smooth finish.
PLASTILINE® 1C Solventborne AREA MARKING road marking paint formulated as a high solid’s, high resin content solvent-based road marking paint for the marking of highways, local roads, intersections, crosswalks, landing strips, brick and concrete surfaces like kerb stones and interlocking bricks, basements, and parking lots with or without reflective glass beads. This product will adhere directly to asphalt and correctly primed concrete roads or paved surfaces.
Systems
| Systems | Typical Thickness (DFT) | Typical Yield | Recommended Drop On | Typical Drop On Yield |
|---|---|---|---|---|
| Smooth | 0.255 mm | 0.500 lt/m² | - | - |
| Anti-Skid | ||||
| Base Layer | 0.255 mm | 0.500 lt/m² | Non-Skid Crushed Glass 125 - 850 | 1.5 kg/m² |
| Final Layer | 0.255 mm | 0.500 lt/m² | ||
Standard Colours
RAL 9016
Traffic White
RAL 1023
Traffic Yellow
RAL 3001
Signal Red
RAL 3013
Tomato Red
RAL 9017
Traffic Black
RAL 5012
Light Blue
RAL 7042
Traffic Grey
RAL 6018
Yellow Green
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
