PLASTILINE® 1C Waterborne High Build
Ultra-performance, high build, acrylic cross-linking waterborne road marking paint.
PLASTILINE® 1C Waterborne HIGH BUILD SANS 731-2 is a one component, adhesion promoted, acrylic cross-linking Quick-Set technology waterborne road marking paint offering fast drying and fast return to service, excellent road performance and reduced emissions.
Specification compliance: SANS 731-1, EN 1436 & EN 1871
Available in 5Lt, 20Lt & 210Lt
Features & Benefits
- High performance marking even at low thickness
- Excellent adhesion to asphalt & primed concrete
- Fast drying
- Suitable for both bituminous & primed concrete surfaces
- Suitable for application with airless and air atomizing equipment
- Excellent glass bead embedment and retention properties
- Excellent coverage
- Excellent resistance against abrasion & enhanced durability through a greater film build
- High luminance
- Environmentally friendly
- Easier, safer clean-up using water
- Available in any RAL Colours
Intended Uses
PLASTILINE® 1C Waterborne HIGH BUILD has been formulated as a high solid’s, high build waterborne road marking paint for increased durability through a greater film build than standard FAST DRY road marking paints. When dry, this product stays flexible providing superior durability on road surfaces where there is expansion & contraction due to temperature variations.
PLASTILINE® 1C Waterborne HIGH BUILD is used for the marking of highways, local roads, intersections, crosswalks, landing strips and parking lots with or without reflective glass beads. PLASTILINE® 1C Waterborne HIGH BUILD will adhere directly to asphalt and correctly primed concrete roads or paved surfaces.
PLASTILINE® 1C Waterborne HIGH BUILD has higher dirt pick up resistance, enhanced glass bead embedment and retention properties with the ability to be applied up to 650µm WET per coat without cracking. When applied correctly with quality reflective glass beads, this product is a viable alternative to thermoplastic road markings.
Systems
| Systems | Typical Thickness (DFT) | Typical Yield | Recommended Drop On | Typical Drop on Yield |
|---|---|---|---|---|
| Standard | 0.265 mm | 0.420 lt/m² | Reflective Glass Beads EXTRA 125-850 AP | 0.600 kg/m² |
| Performance | 0.440 mm | 0.700 lt/m² | Reflective Glass Beads EXTRA 425-1400 AP | 0.700 kg/m² |
Standard Colours
White
Yellow
Red
Black
RAL 6024
Traffic Green
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
