PLASTILINE® 1C Waterborne Area Marking
High solids, high sheen road marking paint for line & area marking.
PLASTILINE® 1C Waterborne AREA MARKING is a one component, Quick-Set technology waterborne road marking paint with a high hardness and a high sheen finish. It offers fast drying and fast return to service even in adverse conditions of low temperature, high humidity, and low air movement.
PLASTILINE® 1C Waterborne AREA MARKING flows easily, has good levelling properties, and dries to a uniform finish free from brush marks, lapping streaks and other imperfections. This product is suitable for brush & roller application to both local & imported bituminous binders and is also suitable for application with road marking spray equipment.
Available in 5Lt & 20Lt
Features & Benefits
- High sheen with low dirt retention & marking resistance
- Easy to process with all marking machines, spray equipment and can be applied using a brush or roller
- Extremely weather resistant & abrasion resistant
- Available in a wide range of colours
- Waterborne, high solids formulation
- Fast drying time
- Excellent levelling & flow properties
- Excellent glass bead retention, adhesion, and long-term retro reflectance
- Excellent obliteration / hiding power
- High reflectivity / luminance factor with glass beads added
- High sag resistance allows for excellent build and coverage on new asphalt
- Excellent resistance to bleeding on bitumen substrates
- Excellent alkali resistance on concrete surfaces
- Excellent adhesion to asphalt
- Excellent performance on suitably primed concrete
- Available in any Classic RAL Colours
Intended Uses
PLASTILINE® 1C Waterborne AREA MARKING is formulated as a high solid’s waterborne road marking paint for the marking of highways, local roads, intersections, crosswalks, landing strips and parking lots with or without reflective glass beads. PLASTILINE® 1C Waterborne AREA MARKING will adhere directly to asphalt and correctly primed concrete roads or paved surfaces.
PLASTILINE® 1C Waterborne AREA MARKING has an increased “open time”, making it suitable for both small & large applications such as parking bays, walkways, or pedestrian crossing etc. The higher sheen and higher hardness results in increased dirt resistance, marking resistance and easier cleanability.
PLASTILINE® 1C Waterborne AREA MARKING is used in all applications where solvent borne products are specified. The advantages of the PLASTILINE® 1C Waterborne AREA MARKING compared to traditional solvent-based traffic paints include:
- Better glass bead retention giving extended retro reflectivity/night-time visibility
- Extended whiteness and daytime visibility
- Environmentally acceptable
- Increased applicator safety – exposure to volatile organic solvents is greatly reduced
- Easier, safer clean-up using water and mild solvent or detergents
- Low odour
- Significantly reduced disposal costs – can be solidified and disposed of as non-hazardous waste
- Non-Flammable
Systems
| Systems | Typical Thickness (DFT) | Typical Yield | Recommended Drop On | Typical Drop On Yield |
|---|---|---|---|---|
| Smooth | 0.250 mm | 0.500 lt/m² | - | - |
| Anti-Skid | ||||
| Base Layer | 0.250 mm | 0.500 lt/m² | Non-Skid Crushed Glass 125 - 850 | 1.5 kg/m² |
| Final Layer | 0.250 mm | 0.500 lt/m² | ||
Standard Colours
RAL 9016
Traffic White
RAL 1023
Traffic Yellow
RAL 3001
Signal Red
RAL 3013
Tomato Red
RAL 9017
Traffic Black
RAL 5012
Light Blue
RAL 7042
Traffic Grey
RAL 6018
Yellow Green
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
