Epoxy
Phenolic 175 CERAMIC
Epoxy Phenolic 175 CERAMIC is a high-performance, solvent-free ceramic-filled epoxy phenolic novolac lining engineered for severe chemical, abrasion, and erosion environments. Reinforced with high levels of inert ceramic powders and fillers, the coating combines the outstanding chemical resistance of novolac epoxy technology with enhanced wear resistance, lubricity, and long-term immersion performance. The highly cross-linked coating structure provides exceptional protection for steel and concrete assets exposed to aggressive chemicals, abrasive slurries, corrosion, and high-temperature service conditions.
Available in 5L and 20L kits.
Features & Benefits
- Ceramic-filled epoxy phenolic novolac technology
- Solvent-free 100% solids formulation
- Exceptional chemical resistance
- Excellent resistance to mineral acids and alkalis
- Superior abrasion resistance
- Outstanding erosion resistance
- Enhanced wear resistance through ceramic reinforcement
- Excellent lubricity properties
- Exceptional protection in slurry environments
- Excellent resistance to mechanical damage
- Superior adhesion to correctly prepared surfaces
- Long-term immersion performance
- Excellent corrosion protection
- High-build protective lining system
- Suitable for severe chemical service environments
- Resistant to chemical splash and fumes
- Excellent resistance to aqueous slurries
- Wet immersion resistance up to 120°C
- Dry temperature resistance up to 150°C
- Suitable for steel and concrete substrates
- Ideal for high-wear industrial applications
- Brush, roller, or airless spray application
Intended Uses
Epoxy Phenolic 175 CERAMIC is specifically formulated for environments where both aggressive chemical exposure and severe abrasion resistance are required. The ceramic reinforcement significantly improves resistance to erosion, slurry wear, and mechanical abrasion while maintaining the exceptional chemical resistance associated with epoxy phenolic novolac coatings. The system is ideally suited for process industries, mining operations, chemical plants, water treatment facilities, and industrial infrastructure where equipment is exposed to corrosive chemicals, abrasive media, and elevated operating temperatures.
Typical Applications:
- Chemical storage tanks
- Acid storage and processing tanks
- Concrete and steel bund walls
- Chemical containment structures
- Pipelines and pipe internals
- Slurry pipelines
- Process pipework
- Pumps and pump casings
- Valves and valve bodies
- Mining process equipment
- Mineral processing plants
- Thickener and clarifier systems
- Water treatment facilities
- Effluent treatment plants
- Industrial floors exposed to chemicals
- Chemical processing equipment
- Culverts and drainage structures
- Steel piles and marine infrastructure
- Equipment exposed to chemical fumes
- Corrosion-prone industrial structures
- Areas subjected to abrasive slurry flow
- Process equipment requiring long-term immersion protection
Technical Information:
- Product Type: Ceramic-Filled Epoxy Phenolic Novolac Lining
- Technology: Solvent-Free Ceramic Reinforced Epoxy Phenolic Novolac
- Configuration: Two Component
- Finish: Gloss
- Colours: Light Grey & Orange
- Volume Solids: 100%
- Mixing Ratio: 4 : 1 (Component A : Component B)
- Activator: Epoxy Activator SF 300
- Density:
- Component A: 1.47 kg/L
- Component B: 1.06 kg/L - Induction Time: 5 Minutes
- Recommended DFT: 600 Microns
- Application: 2 Coats at 300 Microns per Coat
- Coverage: 3.33m²/L at 300 Microns DFT
- Pot Life: 1.5 – 2 Hours at 25°C
- Touch Dry: 4 Hours at 25°C
- Minimum Recoat: 8 Hours at 25°C
- Full Cure: 7 Days at 25°C
- Temperature Resistance:
- Dry Continuous: 120–150°C
- Wet Continuous: 120°C (Chemical Dependent) - Application Methods:
- Brush
- Roller
- Airless Spray - Pack Sizes: 5L Kit & 20L Kit
- Shelf Life: Minimum 12 Months
Epoxy Phenolic 175 On Bare Steel
The following is an indication of performance in contact with a range of various chemicals at 20°C. Information on resistance to other chemicals is available from our Technical Service Department.
| Chemical | Suitability |
|---|---|
| Acetic Acid 20% | 3 |
| Ammonium Hydroxide 20% | 2 |
| Brake Fluid | 1 |
| De-Ionized Water | 1 |
| Hydrochloric Acid 20%+ | 1 |
| Nitric Acid 20% | 4 |
| Sodium Hydroxide 20% | 1 |
| Sodium Hypochlorite 12% Chlorine | 1 |
| Sulphuric Acid 20% | 1 |
KEY (Chemi-Tech USR):
1 = Suitable for continuous immersion (tested up to 3 months @ 20°C)
2 = Short term immersion (<3 days)
3 = Splashes & spills
4 = Not Recommended
Colours & Finishes
Light Grey
Dark Grey
Please Note: Colour swatches and illustrations displayed are only to be used as a guide and can vary from the original.
