SPECPOLYUREA RANGE
Acid & Chemical Resistance Applications
SpecPolyurea 1000 Soft-Flexi
SpecPolyurea 1000 Soft-Flexi is a high performance pure polyurea coating for applications where a more flexible & elastic membrane is required to counter temperature variances or better resist moving substrates.
Available Pack Sizes:
40 Litre / 400 Litre
Typical Applications:
Low load bearing structures | Gutters & valleys | Roof lining & waterproofing
| Properties (Typical values) | |
|---|---|
| Shore A Hardness | 70 |
| Shore D Hardness | 25 |
| Tensile Strength (MPa) | 15 |
| Angle Tear (N/mm) | 42 |
| Elongation (%) | 620 |
| Gel Time (Seconds) | 13 |
| Tack Free Time (Seconds) | 20 |
| Temperature Resistance Dry (°C) | 65°C |
SpecPolyurea 3000 High Strength
SpecPolyurea 3000 High Strength is a high performance pure polyurea coating, and is the workhorse of our polyurea range. Best suited for applications where some elasticity is required with higher hardness.
Available Pack Sizes:
40 Litre / 400 Litre
Typical Applications:
Secondary containment lining | Industrial flooring | External waterproofing of towers & reservoirs | Lining of sewage digestors
| Properties (Typical values) | |
|---|---|
| Shore A Hardness | 92 |
| Shore D Hardness | 45 |
| Tensile Strength (MPa) | 21 |
| Angle Tear (N/mm) | 75 |
| Elongation (%) | 400 |
| Gel Time (Seconds) | 3 |
| Tack Free Time (Seconds) | 5 |
| Temperature Resistance Dry (°C) | 65°C |
SpecPolyurea 5000 Very High Strength
SpecPolyurea 5000 Very High Strength is a high performance heavy duty pure polyurea coating, and is best suited for applications where less elasticity is needed with very high hardness.
Available Pack Sizes:
40 Litre / 400 Litre
Typical Applications:
Secondary containment lining | Steel protection
| Properties (Typical values) | |
|---|---|
| Shore A Hardness | 98 |
| Shore D Hardness | 65 |
| Tensile Strength (MPa) | 21 |
| Angle Tear (N/mm) | 120 |
| Elongation (%) | 200 |
| Gel Time (Seconds) | 8 |
| Tack Free Time (Seconds) | 20 |
| Temperature Resistance Dry (°C) | 65°C |
Our SpecPolyurea can be used outdoors & indoors; but as with all aromatic polyurea coatings, discolouration upon exterior exposure is common. These effects can be masked by using black polyurea or overcoating the polyurea with an aliphatic coating such as SpecSpartic Polyaspartic, PU DTM Flexi HB, PU 55 HB DTM Gloss or Glazetek within the set out overcoating window.
